00A0; NO-BREAK SPACE
   1680; OGHAM SPACE MARK
   2000; EN QUAD
   2001; EM QUAD
   2002; EN SPACE
   2003; EM SPACE
   2004; THREE-PER-EM SPACE
   2005; FOUR-PER-EM SPACE
   2006; SIX-PER-EM SPACE
   2007; FIGURE SPACE
   2008; PUNCTUATION SPACE
   2009; THIN SPACE
   200A; HAIR SPACE
   200B; ZERO WIDTH SPACE
   202F; NARROW NO-BREAK SPACE
   205F; MEDIUM MATHEMATICAL SPACE

        assertThat(graph.removeNode(nodeList.get(i))).isTrue();
      }

      assertThat(graph.nodes()).isEmpty();
      assertThat(graph.edges()).isEmpty(); // no edges can remain if there's no nodes
      AbstractGraphTest.validateGraph(graph);

      Collections.shuffle(nodeList, gen);
      for (Integer node : nodeList) {
        assertThat(graph.addNode(node)).isTrue();
      }

	if cfg.EnableIPv6 {
		families = append(families, unix.AF_INET6)
	}
	for _, family := range families {
		// Equiv:
		// ip rule add fwmark 0x111/0xfff pref 32764 lookup 100
		//
		// Adds in-pod rules for marking packets with the istio-specific TPROXY mark.
		// A very similar mechanism is used for sidecar TPROXY.
		//
		// TODO largely identical/copied from tools/istio-iptables/pkg/capture/run_linux.go

          // yes, that's a lot of sinks!
          sinks.add(new Sink(chunkSize, bufferSize));
          // For convenience, testing only with big endianness, to match DataOutputStream.
          // I regard highly unlikely that both the little endianness tests above and this one
          // passes, and there is still a little endianness bug lurking around.
        }
      }

      Control control = new Control();

  // Modification Operations

  /**
   * {@inheritDoc}
   *
   * @throws IllegalArgumentException if the given value is already bound to a different key in this
   *     bimap. The bimap will remain unmodified in this event. To avoid this exception, call {@link
   *     #forcePut} instead.
   */
  @CanIgnoreReturnValue
  @Override
  @CheckForNull
  V put(@ParametricNullness K key, @ParametricNullness V value);

     * Maven-based resolution. In more detail, this method configures settings relevant for the processing of dependency
     * graphs, most other settings remain at their generic default value. Use the various setters to further configure
     * the session with authentication, mirror, proxy and other information required for your environment. At least,

			/// Enable keep-alive
			{
				_ = unix.SetsockoptInt(fd, unix.SOL_SOCKET, unix.SO_KEEPALIVE, 1)

				// The time (in seconds) the connection needs to remain idle before
				// TCP starts sending keepalive probes
				_ = syscall.SetsockoptInt(fd, syscall.IPPROTO_TCP, syscall.TCP_KEEPIDLE, 15)

				// Number of probes.

  // Modification Operations

  /**
   * {@inheritDoc}
   *
   * @throws IllegalArgumentException if the given value is already bound to a different key in this
   *     bimap. The bimap will remain unmodified in this event. To avoid this exception, call {@link
   *     #forcePut} instead.
   */
  @CanIgnoreReturnValue
  @Override
  @CheckForNull
  V put(@ParametricNullness K key, @ParametricNullness V value);

iptables -t mangle -A ISTIO_PRERT ! -d 127.0.0.1/32 -p tcp -m mark ! --mark 0x539/0xfff -j TPROXY --on-port 15006 --tproxy-mark 0x111/0xfff
iptables -t mangle -A ISTIO_OUTPUT -m connmark --mark 0x111/0xfff -j CONNMARK --restore-mark --nfmask 0xffffffff --ctmask 0xffffffff
iptables -t nat -A ISTIO_OUTPUT ! -o lo -p udp -m udp --dport 53 -j REDIRECT --to-port 15053
iptables -t nat -A ISTIO_OUTPUT -p tcp -m mark --mark 0x111/0xfff -j ACCEPT

    for (int i = 0; i < 11; i++) {
      limiter.acquire(); // #7, showing off the warmup starting from totally cold
    }

    // make sure the areas (times) remain the same, while permits are different
    assertEvents(
        "R0.00, R1.38, R1.13, R0.88, R0.63, R0.50, R0.50, R0.50", // #1
        "U4.50", // #2
        "R0.00, R1.38, R1.13", // #3, after that the rate changes